Hiboy ECOM 14

• Unfold the Scooter
  • Open the folding lock
• Attaching the Handlebars
  • Loosen the screw on the Top of the T-tube with a 5 mm Allen Wrench
  • Put the handlebar on
  • Tighten the screw
• Attaching the Front Wheel
  • Remove axle nuts and washers from the axle bolt.
  • Pull the axle bolt out of the front fork.
  • Discard the black latch 
  • The drum brake is aligned with the middle of the front wheel
  • Insert the front wheel into the front fork

• Do not ride in the rain
• When riding through speed bumps, elevator door sills, bumpy roads, or other uneven surfaces, keep your speed between 3.1 and 6.2 mph
• Do not accelerate when you go downhill
• Do not press the throttle when you’re walking alongside the scooter
• Always steer clear of obstacles

If you see stains on the scooter’s body, wipe them off with a damp cloth. If the stains won’t scrub off, put on some toothpaste, and brush them with a toothbrush, then wipe them off with a wet cloth. Please do not wash the scooter with a high-pressure water spray. During cleaning, the charging cable must be unplugged.